Short answer: Extracted From A Plant is a flavour compound bought mainly by beverage manufacturers. The three things worth verifying before an order are top note, dosage response and the documentation that ships with the lot. Standard packing is 20 kg or 25 kg food grade drum, and a 1 kg to 5 kg trial is normally enough to qualify the material on the bench.
Extracted From A Plant is a flavour compound produced for industrial formulation rather than for retail sale. Production starts with raw material intake and lot identification, moves through the processing steps that define the material's character, and ends with a release decision against a retained reference standard. The reference is the part most buyers never see, and it is the part that decides whether month six behaves like month one.
Because the material is sold on specification, the useful question is not "what is it" but "what does the certificate say". A lot that meets a written range for top note and dosage response is worth more than a lot that is merely described as premium, and the difference usually shows up in the filling line rather than in the sample bottle.
The parameters below are the ones that usually decide whether a trial succeeds. Values are typical release ranges; the certificate for a specific lot will quote measured results rather than the range.
| Parameter | Typical value | Method |
|---|---|---|
| Product | Extracted From A Plant | — |
| Category | Herbal Flavors | — |
| Appearance | Conforms to the retained reference | Visual |
| Top Note | Within the agreed release range | In-house / third party |
| Dosage Response | Quoted on the certificate | In-house |
| Heat Stability | Verified before release | In-house |
| Suggested dosage | 0.05–0.30% in the finished base | Application trial |
| Microbiology | Within food grade limits | ISO 4833 / ISO 21527 |
| Heavy metals | Below the destination market limit | ICP-MS |
| Packaging | 20 kg or 25 kg food grade drum | — |
| Shelf life | 24 months unopened | Stability data |
Applications for Extracted From A Plant cluster around beverage, bakery, confectionery and dairy. The differences between them matter more than the similarities, because the failure mode changes with the matrix.
Beverage: in this system the material competes with everything else for the same sensory or functional space. A three point dosage curve — 0.7x, 1.0x and 1.3x of the suggested level — tells you more in one afternoon than three rounds of correspondence.
Bakery: the constraint here is usually flavour loss during heat treatment. Start at the lower end of the suggested range, confirm the sensory or analytical result, and only then move up. Pushing the dosage to compensate for a weak raw material is the most common reason a formula becomes unstable later.
Confectionery: in this system the material competes with everything else for the same sensory or functional space. A three point dosage curve — 0.7x, 1.0x and 1.3x of the suggested level — tells you more in one afternoon than three rounds of correspondence.
The usual starting point is 0.05–0.30% in the finished base. Two adjustments are almost always needed: one for the process, and one for the market. A process that exposes the material to heat for longer than a few minutes will need a higher charge to deliver the same result at the end, and a market with a stricter labelling rule may cap what you can declare.
Rather than guess, ask for a sample and run the curve. A supplier who has supplied the application before can usually predict where the window sits, and that prediction is worth more than a lower price.
A usable certificate quotes measured values, identifies the lot it belongs to, and states the method behind each number. For this category the minimum set is organoleptic panel, GC fingerprint, specific gravity and refractive index, plus microbiology and a heavy metal statement. If a certificate lists only "conforms" without a value, it is a declaration rather than an analysis.
Ask for the certificate of the lot you will actually receive, not a representative one from last year. The difference shows up when a customer audit asks for traceability.
Standard packing is 20 kg or 25 kg food grade drum. Trial quantities of 1 kg and 5 kg are normally available, and a production run follows once the specification is agreed in writing. Lead time is typically 7 to 15 working days ex-works, and mixed containers can be consolidated across categories to reach a full load.
The documents that matter at the border are the commercial invoice, packing list, certificate of origin where applicable, and the health or non-GMO declarations some destinations require. These are issued with the shipment rather than after it, because a container held at customs costs more per day than the material is worth per kilogram.
Four variables move the price of Extracted From A Plant more than anything else: the specification range, the quantity of the run, the packing, and the documentation. A tighter assay is not a marketing claim, it is a yield loss at the plant, and it is priced accordingly. A 1 kg trial and a 25 kg drum are not the same product commercially even when the certificate is identical.
Beware of quotes that are much lower than the market: in this category they usually mean a wider specification, a substitute raw material, or a certificate written for a different lot. The cheapest way to find out is to buy a sample, test it against the specification, and compare the result with the certificate that came with it.
The recurring issue in this category is flavour loss during heat treatment and top-note drift between lots. It rarely appears in a sample and almost always appears in production, which is why trials should be run in the real matrix rather than in water.
What is the minimum order quantity for Extracted From A Plant? Typically 1 kg for a trial and 25 kg for a production order, though the packing can be adjusted for a first run.
Can you send a sample with its certificate? Yes. Samples of 100 g to 500 g are dispatched with the lot certificate, usually within three working days.
Is the specification negotiable? Within the production window, yes. A narrower assay, a different mesh or a declared allergen position can usually be accommodated, and the answer comes with a sample rather than a promise.
Which documents are supplied? COA for the lot, MSDS, allergen statement, non-GMO statement and packing list.
How is the material packed for export? 20 kg or 25 kg food grade drum, with an inner food grade liner. Custom packing is possible from 100 kg.
How long does delivery take? 7 to 15 working days ex-works for a standard grade, longer where a custom specification or private label artwork is involved.
If you are specifying Extracted From A Plant for a new formulation, the fastest route to a decision is a sample with its certificate and a short conversation about the process it has to survive. Send the target values and the application, and the answer will come back with a specification and a lot number rather than a brochure.
